ELOshield reduces the risk of accidents in high risk or high traffic zones
ELOshield is the innovative personnel detection system from ELOKON. Anywhere where forklift trucks and personnel work in close proximity can constitute a hazard, and protecting the workforce is paramount. ELOshield is a radio-based proximity identification system that considerably enhances safety by automatically detecting when a person enters the danger area surrounding a forklift.
ELOshield can also be used to prevent collisions between forklift trucks or, with the stationary version, for monitoring danger areas such as busy intersections with high levels of internal traffic.
How it works
ELOshield is an innovative, UWB-based protection system designed to safeguard vehicles and personnel. A fixed-site version monitors accident-prone areas, such as busy aisle intersections with high levels of traffic.
A mobile version monitors danger zones of up to 25 metres around moving vehicles (both vehicle-to-vehicle and vehicle-to-person). These zones can be flexibly programmed vehicle by vehicle, based on operating requirements, as circles, symmetrical rectangles, or asymmetrical polygons.
ELOKON GmbH takes great care in compiling the contents of this 3D animation. They are nevertheless only meant to provide non-binding general information and cannot replace detailed individual advice to help the prospective buyer make his decision.
The ELOshield assistance system can only support the driver within the specified system limits. The responsibility for remaining sufficiently alert and carrying out driving or operational duties always rests with the drivers and/or personnel.
The benefits of ELOshield
Product brochure download as PDF
Do you need more information about ELOshield?
We will be pleased to send you further information about our proximity detection system.
|Visualisation unit||Antenna module / Truck module||Pedestrian module||Stationary module|
|Dimensions||120 x 125 x 35 mm||85 x 58 x 35 mm||64 x 125 x 14 mm||110 x 150 x 40 mm|
|Enclosure rating||IP 65||IP 65||IP 54||IP 65|
|Power Supply||12-48DC;, 4W (including 2 DC
|supplied by the visualisation unit||battery powered with USB charger (12 hours continous work in normal operation)||230AC, 10 W|
|Warning signals||acoustic, optical and 2
|-||acoustic, optical and vibration (configurable)||acoustic, optical and 2 NO/NC outputs|
|Operation temperature||-25°C+60°C, non
condensing humidity less
|-25°C+60°C, non condensing humidity less than 95%||-10°C+60°C, non condensing humidity less than 95%||-25°C+60°C, non condensing humidity less than 95%|
|Detection range||-||up to 25 meters depending to the application||up to 15 meters depending to the application|